CableEye ® Generic Test Interface Fixture Rated to 2100 Vdc, CB60
Customize with Panel- and Cable-Mounted Connectors, LIF Test Blocks
IndexDec 9, 2025
CAMI Research Inc.(Acton, MA) manufacturer of the CableEye® automation-ready cable and harness test
system, has released an HV-rated test interface board that can be customized with LIF test blocks and any
number of panel- and/or cable-mounted connectors not exceeding a total of 128 pins. First introduced thirty years
ago, this line of generic boards has earned a reputation among test engineers worldwide as a reliable workhorse
for demanding test interfaces. The CB60 continues this legacy, combining durability with flexible configuration
options for higher pin counts and test voltages. CAMI has decades of experience tailoring solutions to customerspecific
requirements, and offers customization service. Rated to 2100 Vdc/1200 Vdc. Connectors not included.
Custom Interface Cable Test Fixture, CB60
Configuration
A leader in the development of PC-based cable and wire harness test systems, CAMI offers the CableEye suite of products complete with accessories – including auto-detected, plug-in connector boards for fast, convenient set-up and testing of standard cables. There is an extensive and growing stock library of these test fixture boards – several of which are populated with families of connectors, such as the video market’s CB16A for BNC, SMB, SMA, and N connectors. Many boards are sold unconnectorized, a high proportion of which are configured for specific connectors, such as the CB41 through CB44 for Micro D connectors. The CB8 led the way thirty years ago for the family of generic boards CB8, CB8H, CB30, and now the CB60, designed to accept an incredible range of connectors.
When pre-populated and pre-configured boards are used, the tester GUI automatically displays a graphic of the connectors and wiring under test. The tester can be readily programmed to do the same for custom boards and fixtures. These boards are designed to fit all CableEye testers.
This CB60 generic custom interface board accepts a wide range of circular or other connectors and accommodates LIF test blocks and bulkhead and/or cable-mounted mating connectors. While a bulkhead connector mounted directly to the board produces a more compact interface, a cable-mounted solution would be preferred if the test cable consists of heavy-gauge wire or is bulky. Any panel-mount circular connector with four mounting holes fits the “X”-pattern slots. Total pin count cannot exceed 128.
Example Potential Configurations
a) Cable-Mounted Connector
b) Latch Headers
c) Custom Daughter Board Mounted to Latch Headers
Sold as a set of two boards, each test board may be paired with other CableEye adapter boards to accommodate any combination of connectors. Incredibly versatile, CableEye testers are expandable to accommodate large and complex harnesses, and users can connect and configure them in numerous ways — set up an array of QuickMount™ Housings fitted with connector boards, plug custom interface cables directly into any of the 64 pin headers on the control and expansion modules, or use a test interface panel, perhaps on a rack-mounted system. Not just a tester, a CableEye test system is a complete cable management system offering features not available on any other cable test equipment, and may be used to test unlimited types of connectors.
Exacting Reporting Standards
CableEye software allows customers to meet the most exacting reporting requirements of government-contracted and ISO 9000-style certified companies.
Warranty
All connector boards are included in CAMI’s standard, renewable warranty of the tester for which it was purchased.
Availability & Domestic US Pricing
Available immediately, the CB60 (Item 781) requires a 256 TP tester. Rated to 2100 Vdc/ 1200Vac. Customization service is available.
Contact salesREMOVE@REMOVEcamiresearch.REMOVEcom or +1 (978) 266-2655 for a quote.
Note: Prices are USA only and subject to exchange rates, freight and import costs. Contact your local authorized distributor for local pricing.
CAMI Research produces expandable and upgradable diagnostic Cable & Harness Test Systems for assembly, prototyping, production, and QC of standard or custom cables. CableEye Testers display, and document electrical properties such as continuity, resistance, capacitance, dielectric breakdown, insulation resistance, miswires, and intermittent defects.
CableEye ® Automation-Ready Cable and Wire Harness Test Systems
CableEye testers are highly versatile, expandable and upgradable diagnostic and Pass/Fail check Cable and Harness Test Systems that are PC-based. They are used for assembly, prototyping, production, and QC of standard or custom wire cables and harnesses The entire suite of products is powered by the same easy-to-use operating software and, with the help of its signature easy-to-interpret color-coded graphics, instantly identifies not only when there is a fault, but what type of fault and where.
Low Voltage M2 Series
For diagnostic and Pass/Fail Testing - Find, display, log, & document continuity (opens, shorts, miswires, intermittent connections).
Low Voltage M3 Series
For all of the above plus resistance (contact, isolation, embedded), and diodes (orientation, forward voltage, reverse breakdown).
Low Voltage M4 Series
For all of the above plus precision resistance (4-wire), and capacitance (twist wire relationship, length of cable, length to break, capacitors).
Low Voltage and High Voltage HVX Series
For all as described for M3 plus HiPot (dielectric withstand voltage and insulation resistance). 4-Wire Kelvin Measurement and Advanced Measurement Options (capacitance, twist wire relationship, length of cable, length to break, capacitors) are available.
Try One!
photo credit: Progressive Image
photo credit: AP Technology
"Our production guys find it simple to setup and use. Our clients love it as it provides complete traceability for each and every cable assembly we manufacture."
AP Technology, UK