CableEye® Generic Test Interface Fixture, CB61
For Generic + SD50 Hirose Family SMT Connectors, 1mm Pitch
IndexSep 23, 2026
CAMI Research Inc. (Acton, MA) manufacturer of the CableEye® automation-ready cable and harness test system, has released the CB61 test interface board that can be customized with 1mm pitch SMT connectors such as the SD50 Hirose family. Rated to 500 Vdc/Vac. Connectors not included.
Configuration
A leader in the development of PC-based cable and wire harness test systems, CAMI offers the CableEye suite of products complete with accessories – including auto-detected, plug-in connector boards for fast, convenient set-up and testing of standard cables. There is an extensive and growing stock library of these test fixture boards – several of which are populated with families of connectors, such as the video market’s CB16A for BNC, SMB, SMA, and N connectors. Many boards are sold unconnectorized, a high proportion of which are configured for specific connectors, such as the CB41 through CB44 for Micro D connectors. When pre-populated and pre-configured boards are used, the tester GUI automatically displays a graphic of the connectors and wiring under test. The tester can be readily programmed to do the same for custom boards and fixtures. These boards are designed to fit all CableEye testers.
This CB61 generic interface board contains four positions for 20, 30, 40 and 50-pin connector sizes with 1mm pitch, SMT, and is compatible with the SD50 Hirose family of connectors.
Sold as a set of two boards, each test board may be paired with other CableEye adapter boards to accommodate any combination of connectors. An incredibly versatile test system, CableEye testers are expandable to accommodate large and complex harnesses, and users can connect, and configure them in numerous ways — set up an array of QuickMount™ Housings fitted connector boards, plug custom interface cables directly into any of the 64 pin headers on the control and expansion modules, or use a test interface panel, perhaps on a rack-mounted system. Not just a tester, a CableEye tester is a complete cable management system offering features not available on any other cable test equipment, and may be used to test unlimited types of connectors.
Standards-Based Testing and Reporting
CableEye testers perform the continuity, shorts, and HiPot (insulation resistance and dielectric withstanding voltage) tests defined in IPC/WHMA-A-620, and the software produces the traceable test records that ISO 9001-based quality systems and government contracts expect.
Warranty
Connector boards are covered by CAMI’s standard warranty. Contact us for details.
Availability & Ordering
Available immediately, the CB61 (Item 791) requires software B1954 or later to enable auto-ID; software updates and upgrades are complimentary for testers under a Product Support Subscription (PSS). Rated to 500 Vdc/Vac.
Contact sales@camiresearch.com or +1 (978) 266-2655 for a quote.
Note: Prices are USA only and subject to exchange rates, freight and import costs. Contact your local authorized distributor for local pricing.
CAMI Research produces expandable and upgradable diagnostic Cable & Harness Test Systems for assembly, prototyping, production, and QC of standard or custom cables. CableEye ® Testers display, and document electrical properties such as continuity, resistance, capacitance, dielectric breakdown, insulation resistance, miswires, and intermittent defects.
CableEye ® Automation-Ready Cable and Wire Harness Test Systems
CableEye testers are highly versatile, expandable and upgradable diagnostic and Pass/Fail check Cable and Harness Test Systems that are PC-based. They are used for assembly, prototyping, production, and QC of standard or custom wire cables and harnesses The entire suite of products is powered by the same easy-to-use operating software and, with the help of its signature easy-to-interpret color-coded graphics, instantly identifies not only when there is a fault, but what type of fault and where.
Low Voltage M2 Series
For diagnostic and Pass/Fail Testing - Find, display, log, & document continuity (opens, shorts, miswires, intermittent connections).
Low Voltage M3 Series
For all of the above plus resistance (contact, isolation, embedded), and diodes (orientation, forward voltage, reverse breakdown).
Low Voltage M4 Series
For all of the above plus precision resistance (4-wire), and capacitance (twist wire relationship, length of cable, length to break, capacitors).
Low Voltage and High Voltage HVX Series
For all as described for M3 plus HiPot (dielectric withstand voltage and insulation resistance). 4-Wire Kelvin Measurement and Advanced Measurement Options (capacitance, twist wire relationship, length of cable, length to break, capacitors) are available.
Try One!
photo credit: Progressive Image
photo credit: AP Technology
"Our production guys find it simple to setup and use. Our clients love it as it provides complete traceability for each and every cable assembly we manufacture."
AP Technology, UK